Installing the Windows 95/98/Me v3.00 Driver

To install:

Unzipped downloaded file:
- Double-click setup.exe in the elowin9X folder.
After the Welcome and License Agreement dialogs, the third dialog is for selecting single-monitor or multiple monitor setups. A typical setup has only one monitor attached. However, up to four touchmonitors can be connected to four individual COM ports. Make the appropriate selection.
You need only know which COM port the touchmonitor (or each touchmonitor) is connected to. All SmartSet touchscreen controllers are supported, so it is not necessary to know the controller model number.
Files are copied, the driver is installed and the video alignment screen is presented next. Note that system reboot is not required.
Touch the target in the upper left corner; a target then appears in the lower right corner. Touch it, then the target that appears in the upper right corner.
Next, touch various places on the screen and verify that the cursor jumps to the point of touch. Touch the YES button if alignment is OK or the NO button to repeat the process.
- If the process is not completed within 30 seconds, the video alignment routine is aborted.
- The process is repeated for each installed touchmonitor.
The driver is now installed and aligned. Re-alignment should not be necessary as long as the video image is not adjusted.