Skip to content
Corporate Home  |  Tyco Electronics Segment Indicator Electronic Components  |  Segments  |  Who We Are
Elo TouchSystems Home
Sign in to Elo e-Services
Visit www.tycoelectronics.com Elo TouchSystems
Email Email  

Windows XP/2000 Universal Driver for USB and Serial, Single or Multiple Monitors - SW600071

Download drivers

Notes

  • The Windows XP/2000 Universal driver does not support PC-Bus controllers or older serial controllers. It does support all Elo USB and Elo SmartSet serial controllers, including the  CarrollTouch 4000 series.  Both single and multiple monitor installations are supported, on either Windows 2000 or Windows XP, and right-click is supported in two different ways.
  • Be sure to download the touch driver, as new controllers require the latest version.

Installation

  • Double-click the sw600071.zip file in Windows Explorer to unzip the driver files and start the installation wizard. The default installation directory is \Program Files\Elo TouchSystems, Inc\Elo XP Universal Driver 420. The installation can also be accomplished by double-clicking the EloSetup.exe file (which is with the other unzipped files). After installation is complete, you should align the touchscreen (ControlPanel, Elo Touchscreen, General tab: Align button).
  • If you get a reference to COM port selection when installing the USB driver, see the Troubleshooting section, below.
  • The Device Manager should show a Human Interface Device shortly after a USB touchmonitor has been connected to a USB port; if not, see the Troubleshooting section, below.

Removal

  • In Control Panel, Add/Remove Programs, select Elo TouchTools for Windows, then click the Change/Remove button.
    • Close or cancel the Found New Hardware wizard if it appears.
    • After removal, the file folders remain intact; only the system files and Control Panel icon are removed.
    • Also, after removal, the secondary registry entries and the USB portion of the primary registry entries remain intact.

Information

  • File location: \Program Files\Elo TouchSystems, Inc\Elo XP Universal Driver 420
  • Registry keys: See XPU DriverManual. htm, in the unzipped Universal Driver files list (default location is c:\Program Files\Elo TouchSystems, Inc\Elo XP Universal Driver 410)
  • File List
  • Registry entries
  • Device Manager Entries
  • Serial connection minimum requirements: Transmit, receive, DSR, CTS and ground (DB9 pins 2, 3, 6, 8 and 5)
  • Disabling handshaking (required if using a two-wire serial connection)

Troubleshooting

Download drivers