1525L Monitor Quick Help
Video Adjustment Notes
Earlier Models with DC Power Supply (4 Conductor Connector)
- OSD Lock/Unlock: Simultaneously press Up
and Down buttons (2 and 3)
- Power Lock/Unlock: Not available
- Mute: Not available
- Shortcut to Brightness adjust: Press Up
or Down button (2 or 3)
- Shortcut to Auto-Adjust: Press
Select button (4)
Later Models with AC Power Supply
- OSD Lock/Unlock: Press and hold
Menu and Up buttons (1 and 2) for two seconds
- Power Lock/Unlock: Press and hold
Menu and Down buttons (1 and 3) for two seconds
- Mute:
- Simultaneously press and hold Up and Down
buttons (2 and 3)
- Shortcut to Contrast adjust:
Press Up button (2)
- Shortcut to Volume adjust:
Press
Down button (3)
- Shortcut to Auto-Adjust: Press
Select button (4)
Removing the Stand
- Remove the back cover from the stand:
- Grasp the cover at the opening at the
bottom; pull hard. A twisting force usually helps. You may
have to pry a corner loose with a screwdriver to get it started.
- Pry the top of the central plastic cover
loose at the top, then slide it up and out.
- Four screws
secure the stand to the monitor. With the back cover removed from the
stand, you can access the top two screws directly. The bottom two screws
can be accessed by sticking the screwdriver through the two holes in the
front cover of the stand.
Installing an Optional Mount
Use the shortest screws possible to secure the optional mount to the
display. The original screws used to secure the stand will usually work.
The object is to avoid excessively long screws that could damage the
monitor's internal components.
| 
