AccuTouch 2210 Serial Controller
product discontinued
December 2006;
suggested replacement
 The 2210 serial controller (Part # 055165-000) uses the popular EIA RS-232C serial
interface for connection to a wide range of host computers. Hardware
and software handshaking are supported along with packet checksums
for reliable communication. The 2210 board is typically mounted
inside the display enclosure. Power is sourced inside the display.
Specifications for the 2210 include:
Specifications
- RS-232 bidirectional communication
- Baud rates to 19,200 baud
- Multiple output formats: Binary or ASCII
- E261-280, E271-140, E281A-4002 compatibility modes
- Optional software/hardware handshaking: XON/XOFF,
DSR/DTR, RTS/CTS
- Response time: 21 ms at 9600 baud, 7 ms at 19,200
baud
- Power requirements: 5 VDC (± 10%):
- Standby: 0.055 amp
- Touchdown (avg.): 0.160 amp
- Touchdown (peak): 0.240 amp
- Outside dimensions: 3.30 in x 2.10 in (84 mm x 53
mm), maximum height 0.55 in (14 mm)
- Mounting hole located 0.150 (3.81 mm) horizontally
and vertically inside each corner
- MTBF greater than 107,000 hours (MTBF calculations
per MIL-HDBK-217E, Notice 1 Update)
- Temperature
- Operating: 0°C to 70°C
- Storage: -25°C to 85°C
- Humidity: 95% RH, noncondensing
- No CFCs used in manufacture
Agency
Approvals
- Elo controllers
are "CNR/USR" UL Recognized Components for USA and Canada,
Category NWGQ2, Information Technology Equipment Including Business
Equipment.
- Elo controllers
are TUV Bauart certified as components.
- Elo controllers
have been tested for compliance with FCC Part 15 Class B limits.
- Depending on the
application, it may be necessary to pay special attention to system
grounding and shielding, and it may be necessary to apply ferrite
suppressor beads.
- Agency
approval certificates for all Elo controllers and touchscreens
(443K PDF)
Drawings
Options
- Internal mounting kit for serial controller (Part
Number 734849-000)
| 
