Windows XP/Vista Universal Driver for USB and Serial, Single or Multiple
- The Windows XP/Vista
driver supports all Elo USB and Elo SmartSet serial controllers, including the
CarrollTouch 4000 series.
- Be sure to
download the touch driver, as new controllers require the latest version.
- Control Panel,
Add or Remove Programs: select the Elo item, then click the
- Click Yes.
- Close or cancel the
Found New Hardware wizard if it appears.
- Click Finish.
- After removal, the
file folders remain intact; only the system files and Control Panel icon
- Also, after removal,
the secondary registry entries and the USB portion of the primary registry
entries remain intact.
- Installation files location: \Program
Files\Elo TouchSystems, Inc\Elo Universal Driver xxx
keys, files list: See the driver manual.
- The driver manual is in a folder in the unzipped installation files section.
- Downloadable: download links are listed below the downloadable files on elotouch.com.
- Device Manager
connection minimum requirements: Transmit, receive, DSR, CTS and ground
(DB9 pins 2, 3, 6, 8 and 5). Cable is wired straight-through, pin to pin, no crosses.
Disabling handshaking (required
if using fewer than the above serial pins; pins 2 and 5 minimum)
- Multiple monitor setup